| Transport Package: | Bix |
|---|---|
| Specification: | 20x30x25 |
| Trademark: | no band |
| Samples: |
New
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Discription:
We have had voice changers before but NEVER as good as this model.
It's designed by an American Engineer who also developed our most popular bug detector.
You just have to hear the quality of this unit to believe it. You can change your voice from male to female at will or simply disguise your voice beyond recognition.
Even your own spouse will not recognize you on this one folks. The high quality acoustic coupler attaches to the headset and you simply talk into the mic on the unit.
Runs on one 9 volt battery. Comes with handsome carrying case and detailed instruction manual.
Specifications And Features
1. Professional grade voice changer
2. Lightweight and compact
3. Zippered black case
4. Powered by a 9V battery, not included
5. Easy To Use!
6. Fits On Almost All Telephones Even Cell Phones.
Our Professional Voice Changer is compatible on all telephones and can be used on cell phones.
Simply attach the acoustic coupler to your telephones handset, adjust the 16 settings by turning the selector clockwise.
It has 0 being your normal voice, the high settings will increase the pitch and low settings will decrease the pitch.
User manual
Please read these instructions carefully before attempting to
operate the voice changer
Before you attempt to use the voice changer. We suggest you
test its operation as follows:
. Hold the acoustic coupler againse your ear.Turn the unit on
by placing the slide switch to the"NO" position.
. Place the selector switch to the center (0) position.
. Speak ACROSS(not straight into) the microphone which is locate
on the front panel of the unit. You will hear your na tural voice
through the acoustic coupler.
.Now experiment with different settings of the selector switch:
it has sixteen settings ,turing clockwise from 0-*-0, in turn
has seven female voices and eight male voices,"0" is the natural
voice,"*"is the man voice,the"high"se-ttings will increase the
pitch of your voice and the "low"settings will decrease the pitch.
.You will notice that you only need to go one or two "steps" up
or down in order to get a good "voice disquise" while preserving
a natural quality to you voice.At mo-re extreme settings your voice
will not sound natural.
Connection the Voice Changer to a Telephone
1.Place the acoustic coupler against the microphone
portion of the handset. Make suer the holes in the microp
hone portion of the hand set are fully covered by the a
coustic coupler. Then wrap the coupler's strap around the
handset and fasten (see figure 1 below)
Figure
1.Attaching the Coupler to the Handest
2.While holding the receiver to your ear. position the handest
in such a manner that the microphone section with attached
coupler is angled upward away from you mouth
3.Turn the voice changer on by placing the slide switch to the
"NO" position . Set the selector switch to the desired position
4.Speak in a normal tone of voice ACROSS the microphone of the
voice changer(do not speak directly INTO it)
5.At the end of your call,turn the voice changer off.
Replacing the Battery.
.Slide the bottom cover off.(see figure 2 below).Replace the
battery with a Mallory 9V Duracell or Eveready 9V Energizer
.Use good quality alkaline batteries only.
Figure2. Replacing the Battery
Packing box Size : 17x16x3.5CM
Dimensions : 15x7x3cm
Package Weight: 334g
N/W : 203g
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}